Sub-categories:
- Standard Capacity Pleats Series 400
- Standard Capacity Pleats Series 200
- 40%High Capacity Pleats
- 60%High Capacity Pleats
- 40%High Capacity Pleated Elements
- 60% High Capacity Pletated Elements
Product Description:
Standard Capacity Pleats Series 400
The Aerostar Pleated Air Filter – Series 400 incorporates a 100% synthetic media which achieves a MERV 8(ASHRAE 52.2). The 1″ and 2″ filters handle velocities up to 500 fpm – the 4″ filters up to 625 fpm.
- MERV 8 (per ASHRAE Standard 52.2)
- Moisture resistant, 100% synthetic media
- Longer service life means lower operating costs
- A wide range of sizes in 1″, 2″, and 4″ thicknesses
- Maximum recommended continuous operating temperature of 150°F
Applications:
These filters can be used without modification in side-access filter housings or built-up filter banks. They offer better efficiency than conventional permanent or disposable flat filters. The Series 400 filters, when used as pre-filters, substantially extend the life of more expensive high-efficiency filters. They are the perfect filter for residential, commercial and industrial use.
Product Description:
400 Series High Capacity
The Aerostar Pleated Air Filter – Series 400 high capacity incorporates a 100% synthetic media which achieves a MERV 8 (ASHRAE 52.2). The 1″ and 2″ filters handle velocities up to 500 fpm – the 4″ filters up to 625 fpm.
- MERV 8 (per ASHRAE Standard 52.2)
- Moisture resistant, 100% synthetic media
- Longer service life means lower operating costs
- A wide range of sizes in 1″, 2″, and 4″ thicknesses
- Maximum recommended continuous operating temperature of 150°F
Applications:
These filters can be used without modification in side-access filter housings or built-up filter banks. They offer better efficiency than conventional permanent or disposable flat filters. The Series 400 filters, when used as pre-filters, substantially extend the life of more expensive high-efficiency filters. They are the perfect filter for residential, commercial and industrial use.
Product Description:
40% High Capacity Pleated, Class 1
The Aerostar Class I Extended Surface Pleated filters and elements incorporate an ultra-fine fiberglass media available in 40% nominal efficiencies. The media is bonded to a metal grid on the air leaving side, preventing fluttering and maintaining uniformity of the pleats. Available in 2″ thicknesses.
Product Description:
60% High Capacity Pleated, Class 1
The Aerostar Class I Extended Surface Pleated filters and elements incorporate an ultra-fine fiberglass media available in 60% nominal efficiencies. The high capacity version has 50% more media than the standard capacity and has a longer service life. Available in 2″ thicknesses.
Product Description:
40% High Capacity Pleated Element, Class 1
The Aerostar Class I Extended Surface Pleated filters and elements incorporate an ultra-fine fiberglass media available in 40% nominal efficiencies. The media is bonded to a metal grid on the air leaving side, preventing fluttering and maintaining uniformity of the pleats. Available in 2″ thicknesses
Product Description:
60% High Capacity Pleated Element, Class 1
The Aerostar Class I Extended Surface Pleated filters and elements incorporate an ultra-fine fiberglass media available in 60% nominal efficiencies. The high capacity version has 50% more media than the standard capacity and has a longer service life. Available in 2″ thicknesses.
Applications:
These filters are used in commercial and industrial applications where fire codes require using Class 1 listed products. These filters can be used without modification in almost any side-access filter housing or built-up filter bank. Class 1 pleated filters and elements, when used as pre-filters, will add substantially to the life of more expensive high-efficiency filters.
- High capacity pleated design offers greater dust holding capacity
- Longer service life means lower operating costs
- Available as complete filter or element only
- UL900 Class 1 listed